Many users do not know the connection method of cold pressed terminals, so what is the connection method of cold pressed terminals? The connection method and function of cold pressed terminals will be described in detail below!
1. Screw connection of cold pressed terminal
Screw connection is a connection method using screw type terminal blocks. Please pay attention to the size of the cross section of the connecting wire and the limit tightening torque of the screws with different specifications.

2. Welding connection of cold pressed terminal
Welding is the most common type of welding. For welded connections, the most important is the continuity of the metal between the solder and the surface. Therefore, solderability is important for cold pressed terminals. The most common platform for the welding end of the ring terminal is tin alloy, silver and gold. Reed contacts have welds, punched lugs and notched lugs for common welding ends: pinhole contacts have been drilled for arc notches drilled.
3. Crimping connection of cold pressed terminal
Crimping is a technique for compressing and replacing metal within specified limits and connecting wires to contact pairs. A good crimping connection can cause metal to flow to each other, causing wires to contact symmetrically with the material to deform. This connection is similar to the cold welding connection, which can obtain better mechanical strength and electrical continuity, and it can withstand more severe environmental conditions.