To properly crimp Non-insulated terminals, you will need a crimping tool specifically designed for this purpose. Here are the general steps to follow when crimping non-insulated terminals:

1.Strip the wire: Use a wire stripper to remove a section of the insulation from the end of the wire. The length of the stripped portion should match the length specified by the non-insulated terminal manufacturer.

2.Select the appropriate terminal: Choose the non-insulated terminal that matches the wire gauge and type specified for your application. Non-insulated terminals are available in various sizes and configurations, so ensure you have the correct terminal for your wire.

3.Insert the wire into the terminal: Slide the stripped end of the wire into the barrel of the non-insulated terminal. Make sure the wire is inserted fully, reaching the back of the barrel.

4.Position the terminal in the crimping tool: Place the terminal in the appropriate crimping slot or cavity of the crimping tool. The slot should match the size of the terminal.

5.Crimp the terminal: Squeeze the handles of the crimping tool firmly and evenly to compress the terminal around the wire. Apply enough pressure to create a secure connection, but avoid over-crimping, which may damage the terminal or wire.

6.Inspect the crimped connection: After crimping, visually inspect the connection to ensure that the wire is securely held within the terminal and that there are no loose strands or gaps. A properly crimped terminal should provide a tight and solid connection.

7.Test the connection: If possible, use appropriate testing equipment to verify the integrity of the electrical connection. This step ensures that the crimped terminal provides the desired conductivity and meets the required electrical standards.

Non-Insulated Flag Terminals

Brand:KF
Finish/Coating:Tinned
Base Materials:Copper
Insulation Material:N/A
Brazed:Seam
Wire/Cable Type:Regular Wire
Color Code:Standard
MOQ:1000Pcs/item
Payment Terms:Based on orders
Delivery:FOB/CIF/DDP