The cold-pressed terminal can be divided into two types: copper and aluminum, and its open mouth and closed comedones. When the cold-pressed terminal is wired, it can be crimped immediately with ordinary special tools, so no welding is required. In actual operation, the cold-pressed terminal is actually a kind of lug that is convenient for the screwing of the power line, so it is immediately pressed on it.

Therefore, cold extrusion and pressing are actually corresponding, and they can be pressed immediately without heating. Most of the cold-pressed terminals are used on the top of the connectors of cables and power projects. In the power supply and distribution system of all power projects, the applications of cold-pressed terminals are many and common.

If it is a relatively small and medium-sized cold-pressed terminal to be crimped, it can be crimped immediately by using a network cable pliers, and if it is a relatively large and medium-sized cold-pressed terminal, then it must be used. Hydraulic pliers, in which Hydraulic pliers can also be divided into two types: manual type or electric type, and then integrate the abrasive tool to carry out the solution of crimping. The early engineering blasting crimping method is actually suitable for the crimping application of cold-pressed terminals outdoors. .