How to use the lightning protection effect of the terminal block to be better?
The wiring terminals we install outdoors are relatively concealed, and the possibility of being directly struck by lightning is very small, but it is not complete, because some always have one end connected to the device, so they will also be affected by lightning. , So to be foolproof, then how to install the terminal block to make the lightning protection effect good. This article discusses this in detail.

1. We have strict requirements for the wiring terminals to be installed. If they do not meet the national standards, they are absolutely not allowed to be used, so we need to grasp it at the source. Moreover, it is good to have a clear understanding of the use of the purchased terminal blocks, so as to avoid problems caused by unqualified quality during operation.

2. It is necessary to understand some information of the equipment that needs to be used, such as power capacity, etc., so that we can choose the wiring terminal that meets the situation and improve the safety performance.

3. When we install the terminal blocks, we must deal with the contact surface, such as sanding and applying conductive paste. The purpose is to make the boundary terminal and the lead clamp contact well and reduce the occurrence of heat generation.

4. Keep the surroundings of the wiring terminals without obstacles, and check the wires frequently to reduce the occurrence of hazards.