Cold-pressed terminals are mainly components of electronic devices. In the case of wiring, wire knots and terminals must be applied, mainly the method of riveting, which will be applied to special tools such as network cable pliers for assistance, so it is not everyone The common electric welding, because there is no need to carry out all the heat treatment processes, there is a big difference between the grouting method of molten tin, and it is precisely because of that that people call this type of terminal a cold-pressed terminal.

The cold-pressed terminals can also be called wire noses. The key can be divided into three types: closed acne, open mouth and copper-aluminum. They are basically all used in power engineering and cable joint tops. At present, they are widely used in the market. The terminals of the pcb board also include screw cap terminals, hardware continuous terminals and spring yellow terminals.

In fact, the key processing technology of cold-pressed terminals is the stamping die, but the electroplating process must be carried out on the surface of the cold-pressed terminal after the stamping die. At this moment, the selection of raw materials for the electroplating process is very important. It must be selected with better ductility and conductivity. Copper material with very high performance.
In fact, the insulating layer terminals are commonly referred to as cold-pressed terminals, and the RF connectors and overhead connectors of electronic devices are actually all cold-pressed terminals. The key function of cold-pressed terminals is to use A product of spare parts for electrical equipment to be connected. In industrial production, cold-pressed terminals are actually classified as radio frequency connectors. In recent years, China’s industrial production automation technology level and its industrial production The operation and regulations are becoming more and more precise and strict, and the demand for wiring terminals is also increasing day by day. With the continuous and rapid development trend of the electronic industry, all the application areas of wiring terminals are expanding, and their types There are also more and more, but at this stage, the most common applications on the market should be pcb board terminals. In addition, hardware continuous terminals, spring yellow terminals and nut terminals are also more common.