​Introduction to several common crimping methods of cold-pressed terminals? Maybe everyone is not very familiar with cold-pressed terminals, but it is often useful in our lives. Cold-pressed terminals are mainly small parts used for electrical connection. Due to their small specifications and sizes, they are used in many environments, but everyone is not very clear. At present, there are many specifications and styles of cold-pressed terminals in our country, but no matter which kind of cold-pressed terminals are composed of connectors and air connection terminals.
The first type of crimping method for cold-pressed terminals is riveting crimping: the riveting crimping method is relatively straightforward, mainly to prevent the crimped metal from moving too far. After the metal is fixed, the wire A method for connecting cold-pressed terminals. Using the riveting type crimping method, the operating strength and current continuity of our cold-pressed terminals are better. This is mainly because the riveting type crimping can operate under more unfavorable conditions.

The second type of crimping method for cold-pressed terminals is in-line crimping: In-line crimping is a method of directly connecting the wire and the connecting board. When the in-line crimping method is used, it is usually selected Connect a relatively long cold-pressed terminal, so that it is more convenient for the wire to be inserted into the corresponding hole. After the wire is inserted, we will use the immersion method to do a soldering. This method of crimping is relatively strong, and many people use this method.

The above are two commonly used crimping methods for our cold-pressed terminals. I hope to provide some help. However, with the advancement of our industrial technology, most people are now applying the first method to crimp cold-pressed terminals. Tube-type terminal is one of the specifications of cold-pressed terminals, which can be crimped by equipment. With the advancement of industrial technology, manual crimping will gradually become less demanding, and machine replacement is an inevitable trend. Companies that process wire harnesses must choose reliable wire harness processing equipment suppliers, and that is how Zhongchi Machinery exists. If you want to buy wiring harness processing equipment, Zhongchi Machinery is a good choice, mainly serving home appliances, electronic appliances, automobile and motorcycle wiring harnesses, complete sets of power transmission and distribution equipment, meter box distribution cabinet wiring, new energy vehicles, charging The three major areas of guns and charging pile wire harnesses.

https://www.kf-terminals.com/