Metal stamping parts Non-Insulated Terminals are widely used in our lives, including some electronic devices, auto parts, decorative materials and so on. The stamping parts we usually refer to generally refer to cold stamping parts. For example, if you want to turn an iron plate into a fast food plate, you must first design a set of molds. The working surface of the mold is the shape of the plate. Press the iron plate with a mold to become the plate you want. This is cold stamping, which is to directly stamp the hardware material with a mold.
Metal stamping parts are widely used:
1. Stamping in the automotive industry. Mainly draw. In my country, this part is mainly concentrated in large factories such as automobile factories, tractor factories, and aircraft factories. There are few independent large-scale stamping and drawing factories.
2. Stamping of auto parts and other industries. Mainly punching and shearing.
3. Electric device stamping factory. This type of factory is a new industry, developed with the development of electrical appliances, and the factories in this sector are mainly concentrated in the south.

4. Stamping factory for daily necessities. Making some handicrafts, tableware, etc., these factories have also developed greatly in recent years.
5. Home appliance parts stamping factory. These factories only appeared after the development of my electrical appliances, and most of them are distributed in home appliance companies.
6. Special stamping enterprises. For example, the stamping of aviation parts belongs to this type of enterprises, but these process factories are also classified as some large factories.
The processing of metal stamping parts is the production technology of product parts with the help of conventional or stamping equipment, so that the sheet metal is directly subjected to deformation force in the stamping part mold and deformed, so as to obtain the shape, size and performance of the product parts. Sheet material, mold and equipment are the three elements of stamping processing. Stamping is a metal cold deformation processing method. Therefore, it is called cold stamping or sheet stamping, or stamping for short. It is one of the main methods of metal plastic working (or press working), and also belongs to material forming engineering technology.
The die used for forming the stamping part is called the stamping part die, abbreviated as the die. A die is a tool for batch processing a material (metal or non-metal) into the desired stamping parts. The stamping die is very important in the production of stamping parts. Without the die that meets the requirements, the production of stamping parts in batches is difficult; without the die, the stamping process cannot be realized. The stamping process and the metal stamping die, stamping equipment and stamping materials constitute the three elements of stamping processing. Only when they are combined with each other can stamping parts be obtained.